- Sixaxis Controller Android
- Ps3 Controller Stuck In One Direction
- Xbox Controller Stuck Moving Right
- D Pad On Xbox One Controller Stuck
- Sixaxis Controller Stuck Driver Starting Windows 7
So I’ve been busting my head for a few weeks now trying to use my PS3 controller on my Android. The reason why I can’t seem to get it to work is because after I install the Sixaxis pair tool on my PC I plug in the PS3 and from here the program gets stuck on ” installing driver”. I get this with the 0.1 version of the program. The DUALSHOCK 3 wireless controller for the PLAYSTATION 3 system provides the most intuitive game play experience with pressure sensors in each action button and the inclusion of the highly sensitive SIXAXIS motion sensing technology. The next video is starting stop. Get YouTube without the ads. No thanks 3 months free. Find out why Close. Sixaxis Controller Set up Walk Through (Android).
I've been using my PS3 controller as a gamepad quite a bit recently. I'm using MotioninJoy's DS3 tool, with the controller connected with a USB cable to the desktop. Everything is working great, except that each time I close my computer or disconnect the controller it 'panics' and turns on my PS3, at which point I have to go and close it.
https://blasterever.tistory.com/9. Currently It supports 55 formats of video downloads. It can download Vevo videos, age-restricted videos, region protected videos. GenYoutube provides Youtube video downloads in mp4, webm, m4a, 3gp and 3D formats which ranges from mobile friendly to HDTV resolution.
Is there any way to properly close the controller before closing my computer so that it doesn't do that, or perhaps make it forget about the PS3 so that it doesn't turn it on once it starts panicking?
Robotnik♦6 Answers
I managed to find something that works for me, and it appears that the answer was right under my nose. The DS3 tool's main window has a 'disconnect' button, as can be seen here on the lower left:
As long as I make sure to press it before shutting down my computer, the controller stays dormant and doesn't bother my PS3.
AubergineAubergineIf you reset the PS3 controller then it should no longer be synced with your PS3, and won't cause your PS3 to turn on.
Card games depend on the use of cards by the players. Card games are played with a deck or pack of playing cards which are identical in size and shape. In the online card game versions these cards are digital, so it is impossible to cheat. Play your cards right in our free online card games! Feb 04, 2004 Beanie card = 25 points, so don’t hold onto them unnecessarily. After the scores are totted up, the person who started the last round dealt and the next lowest card is. How to play card game beanie.
You can use a paperclip or similar object to gently press the reset button.
Hold the PS button till the lights go off, instead of disconnecting
Holding the PS button worked for me. I held it 11 seconds, and the controller turned off.
UllallullooYou'd have to do a wireless sync via Bluetooth with your computer to be able to turn off the controller easily. But then you'd have to resync your controller with the playstation when you want to use it on ps3 again. Best to have a least two controllers, so you wouldn't have to switch them over as often. Only when playing co-op.
But for that you need a Bluetooth dongle and proper drivers.
Not the answer you're looking for? Browse other questions tagged controllersmotioninjoy-ds3tool or ask your own question.
Contents
|
This page provides information on connecting a Sony PS3 Sixaxis or DualShock 3 Joystick via Bluetooth and configuring Ubuntu to use it in a variety of environments.
Sixaxis Controller Android
Much of the information on this page applies to old versions (3.x) of the Bluetooth userspace stack (bluez) found in 8.04/Hardy and below, not the the current versions (4.x) found in 8.10/Intrepid and above. Approaches that are more current include:
QTSixA, a dedicated SIXAXIS manager project supporting both USB and Bluetooth (PPA provided)
Bug 124743, a feature request for SIXAXIS Bluetooth support built into Ubuntu's own bluez
An Ubuntu user's custom bluez .deb for 12.04 Precise adding support for the SIXAXIS, plus details of what went into it and why
1. Add the qtsixa ppa which contains an updated version of sixad
1a. Update and install the sixad package.
2. Connect your ps3 controller to your computer via usb and run:
Ps3 Controller Stuck In One Direction
3. Unplug your ps3 controller from the usb cable and run:
When prompted, press the PS button on the controller. If it's detected correctly, the controller will vibrate. Then use jstest-gtk to test your controller.
Included on this page is information to pair the Sixaxis with a bluetooth receiver, configure xserver to recognize it as an input device (mouse/keyboard support), integrate controls with MythTV, and integrate it with a number of console emulators.
The pairing process is done with the controller connected via USB.
Requirements
- Must be using kernel version 2.6.21 or later
- Must have the libusb-dev and libusb-0.1-4 package installed.
USB Pairing
- Connect the controller to a USB port.
- Run sixpair
a) Download sixpair.c (save to a directory such as /home/%user%/sixaxis) b) Compile sixpair using c) Run sixpair
- Disconnect the USB cable
Patch HIDD from bluez-utils
Download patch-hidd-3.19-pabr3 (save to a directory such as /tmp)
- Create a directory and download bluez-utils source and dependencies there:
- Go into the bluez-utils-x.xx directory and run
- Rebuild the package:
- Install the new package (ignore the others that were created):
- Optional: if you will dist-upgrade your system, the process will overwrite your modified package with newer versions. You can either choose to redo the above steps every time a new version of bluez-utils is packaged, or 'hold' the package. This should work with both apt and aptitude:
Bluetooth Monitoring
Stop the BlueTooth service
- Make sure all hcid processes are stopped
- Run HIDP daemon in terminal
- a) Press the PS button on the Sixaxis hidd should echo b) Press Ctrl+C to end the process
Start the BlueTooth service
We first need to install the input-joystick drivers XServer needs, and then either configure HAL (for newer X versions) or add an InputDevice to xorg.conf (for older versions).
Driver Installation
The package xserver-xorg-input-joystick is required to use the Sixaxis as an input device without the use of a third party program. There are two installation methods for the package. The simpler method is to install via the repositories, but you may also compile your own copy of the drivers.
Note: if using Hardy Heron (8.04) you will need to compile the drivers yourself as one of the files needs to be modified.
Install from Repositories
- Install the package xserver-xorg-input-joystick from the Ubuntu Repositories
Compile and Install from source
- The package xorg-dev is required to compile the drivers. To install the package..
- Uninstall the package xserver-xorg-input-joystick if it's already intalled
- Make a directory to download and compile the source in (such as /home/%user%/input-joystick)
- In the terminal..
- Edit the source. (This step can be skipped if using an Ubuntu version prior to 8.04)
- Now we must comment out lines 252-254. After doing so those lines in jstk.c should look like this:
- At this point we are ready to compile and install. Here are the commands you will need:
Configuring newer versions of X.Org (XServer >= 1.5) with HAL and automatic hot-plugging
With this configuration X will automatically detect and hotplug the Sixaxis when needed, and switching betweem USB and Bluetooth happens transparently.
1. Edit /etc/X11/xorg.conf and add the following line in the ServerFlags section (if it does not exist, create it):
2. Configure HAL
Create the following file: /etc/hal/fdi/policy/x11-joystick.fdi (it must be of the form <name>.fdi) and paste a configuration like the example below (taken from the stock xf86-input-joystick):
3. Restart HAL and X.Org by dropping into console (Ctrl-Alt-F1), then:
Note: Older versions of X.Org (XServer 1.4.x) will support the above configuration and will correctly plug/unplug the joystick, however they don't support the 'input.x11_options.xxx' tags so you cannot customize the controls.
Disable Joystick From Controlling Mouse
If you want to play games with your controller, you might want to disable gamepad control over mouse cursor. To do this, edit /etc/X11/xorg.conf and add those lines:
Configuring older versions of X.Org (non hotplug)
1. First make two copies of xorg.conf. One will be a backup and the other will be the version we edit.
2. Now open xorg.conf in a text editor. To open with gedit:
3. Add the new InputDevice section to xorg.conf. It can be added anywhere in xorg.conf. Here is an example.
Note: a detailed explanation of the input options can be found in the xserver-xorg-input-joystick manual which can be opened with $man joystick
4. Add the new InputDevice to the ServerLayout section of xorg.conf. The line you need to add is as follows.
The ServerLayout section should now look similar to this:
Xbox Controller Stuck Moving Right
5. Now we should test xserver with our new config file. First turn on the ps3 controller, and then try out the following command. You can restart X by logging out and back in, or typing sudo /etc/init.d/gdm restart.
- You should see a static filled screen with a big X for a cursor. At this point you should be able to move that cursor with the left joystick on the Sixaxis. If not, go back and tweak your settings in xorg.conf.
6. To make our settings permanent, replace xorg.conf with xorg.conf.sixaxis.
D Pad On Xbox One Controller Stuck
The accelerometer and gyro axis do not work but can be used by reading the raw device -- see http://www.pabr.org/sixlinux/sixlinux.en.html for more information. Intellij idea ultimate edition price.
The full version is 'Windows 10' and can upgrade to Home or Pro depending on previous Windows version. Be careful to download the right language, or you won't be able to upgrade! Pentium r dual-core e5400. Others are restricted and can upgrade only the respective restricted Windows 7 or 8 versions. English language warning: 'English' is English US, while 'English International' is English GB.
- The rumble feature is not supported.
- The leds keep blinking and do not report the chosen input device.
- Multiple gamepads on the same system have not been tested.
- When using the static X.Org configuration, the Sixaxis will not be hot pluggable -- if turning on the Sixaxis after Ubuntu is already running it will not work.
Sixaxis Controller Stuck Driver Starting Windows 7
- Add sections for using the Sixaxis in variety of emulators
- Add section for using the Sixaxis in MythTV
CategoryBluetoothCategoryHardware